BGFBJ - TURCO 5555-H

  • MSDS: BGFBJ
  • Manufacturer: TURCO PRODUCTS INC
  • Product Name: TURCO 5555-H
  • National Stock Number: 8010-01-021-2440
Product Identification

Product ID:TURCO 5555-H
MSDS Date:01/01/1985
FSC:8010
NIIN:01-021-2440
MSDS Number: BGFBJ

Responsible Party
TURCO PRODUCTS,INC.

Emergency Phone: 213-634-3300

Cage: D9808

Contractor
TURCO PRODUCTS,INC.
6200 PHILADELPHIA, PA 19103 US

Telephone: 215-419-7890

Cage: D9808

Ingredients

2-BUTOXYETHANOL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 30.0%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293


ETHANOLAMINE

CAS: 141-43-5

RTECS: KJ5775000

Fraction By Weight: 30.0%

OSHA PEL 3 PPM/6 STEL

ACGIH TLV: 3 PPM/6 STEL; 9192


SODIUM FLUORIDE (SARA III)

CAS: 7681-49-4

RTECS: WB0350000

Fraction By Weight: <0.5%

OSHA PEL 2.5 PPM F

ACGIH TLV: 2.5 MG F/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:SKIN IRRIT;MOD TO SEV IRRIT TO EYES;CAUSES
HEADACHE,DIZZINESS,ETC.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR;EYES:FLUSH W COPIOU WATER FOR 15
MIN,GET MED ATTN;SKIN:WASH W WATER;INGESTN:GIVE LG QTY OF
WATER,CALL IMMED A PHYSICIAN.

Fire Fighting

Flash Point:165F PMCC
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:CO*2,DRY CHEM,FOAM
Fire Fighting Procedures:NONE KNOWN
Unusual Fire/Explosion Hazard:NONE KNOWN

Accidental Release

Spill Release Procedures:VENTILATE AREA.ILLIMINATE SOURCE OF IGN.STOP
LEAK W/O RISK.CONTAIN SPILLAGE.WIPE UP ONTO ABSORBENT MATL.RECOVER
IN DRUMS SUITABLE FOR SHIPMENT TO DISPOSAL LOCATION.

Handling

Handling and Storage Precautions:TRANSPORT & STORE IN CLOSED CONTAINERS
AT TEMP BETWEEN 32F-100F.PROTECT CONTAINERS AGAINST PHYSICAL
DAMAGE.
Other Precautions:AVOID BREATHING & SKIN CONTACT.

Exposure Controls

Respiratory Protection:NOT REQD IN NORMAL CONDITIONS
Ventilation:MECHANICAL(GEN)
Protective Gloves:RESISTANT
Eye Protection:CHEM GOGGLES
Other Protective Equipment:SOLVENT RESISTANT APRON
Supplemental Safety and Health
MFGR STATED 9/1/82 THAT PROD IS NOT CORR & IS SAFE ON MG/CU
ALLOY,CD,PB,NI,AL ALLOYS.HAS PH 12.2 OPERTNG TEMP & POSES NO HEALTH
HAZARD IN NORMAL CONDITIONS.

Chemical Properties

HCC:V4
Boiling Pt:B.P. Text:200F
Vapor Pres:<1.
Vapor Density:2.0
Spec Gravity:0.97
Evaporation Rate & Reference:<1.0(BU ACETATE)
Solubility in Water:APPRECIABLE
Appearance and Odor:2 LAYER MATL-TOP LAYR COLORLESS,LOW LAYR AMB LIQ
Percent Volatiles by Volume:15.0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:SOURCE OF IGN
Hazardous Decomposition Products:CO*2,OXIDES OF NITROGEN.

Disposal

Waste Disposal Methods:DISPOSE OF IAW LOCAL,STATE & FED REGS,OR
LANDFILL IAW EXISTING REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.